MSD 2225 In-Line Hi-Pressure Fuel Pump

Description

Mounts in-line and out of the fuel tank, Has 3/8” hose barb inlet and 3/8" hose barb outlet, Flows 43 gph (282 lb./hr.) gasoline @ 40 psi and 12 volts/5.4 amps, Designed to support most multiport EFI systems up to 500 horsepower, The roller vane pump mechanism is extremely resistant to clogging and jamming
MSD 2225 In-Line Hi-Pressure Fuel Pump
Sku # 5472225
Mfr. Part # 2225
Condition
New
Brand
MSD
Sold
Each
Details
Notes
The threads where the wires hook are 8/32" brass.
Pump is ideal for use as a "booster" for nitrous oxide applications, or as a stand alone pump for multiport EFI systems on engines up to approximately 500 HP.
Info
Most modern engines have a hi-pressure fuel pump located in the gas tank. If you are transplanting one of these engines into your hot rod, what are you going to do for a fuel pump? This MSD pump can be mounted on the frame and can put out up to 43 gph at 40 psi or 39 gph at 80 psi.
Flows 43 gph (282 lb/hr) gasoline @ 40 psi and 12 volts/5.4 amps
Supports most multiport EFI systems up to 500 horsepower
Mounts in-line (out of the fuel tank)
Roller vane pump mechanism is extremely resistant to clogging and jamming
Has 3/8” hose barb inlet and 3/8" hose barb outlet
1.83" pump body diameter
Made in the USA
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
California Customers: This part has been identified as emissions sensitive and can only legally be installed on race-use only vehicles, off-road-use only vehicles, or pre-1965 vehicles in the State of California in accordance with the California Air Resource Board (CARB) requirements. Once your order is placed you will be contacted by Speedway Motors within 2 business days so that you can certify that you will only use such parts on these types of vehicles in California.
Specs
Sold in Quantity
Each
Fuel Type
Gasoline | Alcohol
Notes
Includes 2 cushioned mounting clamps and 4 mounting bolts.
MFG. Part #
2225
Clamps Included
Yes
Overall Length
7.50
Voltage
12
GTIN Code
085132022250
Electric Fuel Pump Type
External
Electric Fuel Pump Inlet Fitting(s)
3/8" Hose Barb
Electric Fuel Pump Outlet Fitting(s)
3/8" Hose Barb
Horsepower Rating (Naturally Aspirated)
500 HP
Free Flow Rate
43 GPH / 163 LPH / 282 lb/hr
Inline
Yes
Maximum Pressure
40
Reviews
So far, So good.
Rated
by Steveg623 on April 07, 2021
Summary:
Used on my MSD ATOMIC SYSTEM. Works well as described.
Yes, I recommend this product.
Would buy it again
Rated
by Armando240sx on July 16, 2020
Summary:
Needs AN fittings on both ends
Cons:
Would be nice if it had AN fittings on each end
Yes, I recommend this product.
LS 5.3 swap.
Rated
by 86C10 on December 06, 2019
Summary:
This inline pump works good for a LS 5.3 swap in a C10 pickup.
Yes, I recommend this product.
I liked this pump
Rated
by Xlr8er on October 04, 2019
Summary:
Works great
Yes, I recommend this product.
Just What I Needed
Rated
by Cruizers on June 14, 2019
Summary:
Bought this fuel pump for a Rat Rod Build. Was just what I needed.
Yes, I recommend this product.
Related Items / Suggested Parts
Walbro GSL392 Inline Racing Fuel Pump
Earls 750005ERL Vapor Guard Screw Type 5/16 Inch Hose Clamp 5/Pk
Speedway GM LS V8 Fuel Filter/Fuel Regulator Kit, 58 PSI
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.