Fuel Pump Fit For Ford E-150 Econoline 5.8L 5.0L 4.9L 1989 1990 1991

Description

The Function of the fuel pump is to supply fuel at a certain pressure to the engine fuel injection system.
However,the fuel pump have a limited life.If you notice any of the following signs with your car:
(1).Engine Sputtering at High Speeds
(2).Decreased Fuel Pressure
(3).Losing Power when the Vehicle is under Stress
(4).Inability to accelerate
(5).Decreasing Gas Mileage
(6).Engine Not Starting
This may indicate that you need to replace the fuel pump
Fuel Pump Replacement Guideline:
Please Note the following before replacing the fuel pump:
Fuel Pump Fit For Ford E-150 Econoline 5.8L 5.0L 4.9L 1989 1990 1991
The Function of the fuel pump
is to supply fuel at a certain pressure to the engine fuel injection system.
However,the fuel pump have a limited life.If you notice any of the following
signs
with your car:
(1).Engine Sputtering at High Speeds
(2).Decreased Fuel Pressure
(3).Losing Power when the Vehicle is under Stress
(4).Inability to accelerate
(5).Decreasing Gas Mileage
(6).Engine Not Starting
This may indicate that you need to replace the fuel pump
Fuel Pump Replacement Guideline
:
Please Note
the following before replacing the fuel pump:
1.Ensure that you are in a well ventilated and level work area.
2.Use approved safety glasses or goggles when working on any motor vehicle.
3.The gasoline is sucked out of the tank and stored in a container dedicated to gasoline.
Picture(A)
Disconnect the ground (
negative
) cable of the battery and ensure that it does not accidentally spark while working.
Picture(
B
)
Locate and remove gas tank filler neck mounting bolts or remove the filler tube from the tank.
This will aid the fuel removal especially if you had problems accessing through the filler neck.
Picture(
C
)
Located the electrical connector for the fuel pump and fuel level sender which will be in the same wiring harness.
If access if difficult or you can't see them wait until the tank is lowered slightly to undo the connector.
Inspect electrical connector for burns or heated spots and replace if damaged.
A burned connector can cause a pump to fail intermittently.
Picture(
D
)
There will be fuel vapor lines as part of the EVAP system these will need to be removed or disconnected.
Picture(
E
)
Locate and release tank holder supports, there are two in most cases.
Remove the mounting bolts at this point the tank will become loose but may not come out.
Picture(
F
)
Lower the tank and release top mounted fuel lines or electrical connectors if any. Continue to remove the tank.
Picture(
G
)
Remove the tank, this will expose the fuel pump retainer ring.
Use an aerosol cleaner to remove dirt and debris from the area.
This will keep the inside of the fuel tank clean when performing the repair.
Picture(
H
)
Remove fuel pump mounting bolts or retainer ring to access the fuel pump module and remove the unit.
Use a hammer and punch to remove the ring counterclockwise.
Picture(
I
)
Remove the fuel pump which will be attached to the mounting plate or positioned down inside the tank held by plastic retainer clips.
Picture(
J
)
Remove the fuel pump from the tank.
Item Specifics
Brand
Fuel_Kingparts
Manufacturer Part Number
FK11620801G
Drive Type
Electrical
Fuel Type
Gasoline
Fitment Type
Direct Replacement
Manufacturer Warranty
1 Year
Mounting Hardware Included
No
OE/OEM Part Number
E2147S67075,P74598S,HP10187,SP2019H
Custom Bundle
No
Gasket Included
Yes
Modified Item
No
Voltage
12 V
Internal Or External
Internal
Universal Fitment
No
Quantity Per Application
1
Wiring Harness Included
No
Outlet Size
3/8"
Terminal Quantity
4
Inlet Count
1
Outlet Count
1
Pressure
5-7 psi
Flow Rate
30-40 gph
Fuel Level Sender Resistance
10-70 ohm
Amperage
10 A
Type
Fuel Pump
Payment
We only accept payment through PayPal.
Shipping
All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
Returns
All of our brand new items come with a 60-Days money-back guarantee.
Contact Us
Any question, please contact us by email on working days.
Warning
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Best Sales
For Chevy C1500 C2500 C3500 K1500 K2500 K3500 GMC C1500 C2500 C3500 Fuel Pump
USD 54.74
For Pontiac G6 Chevy Malibu 2.4L 3.5L 3.6L 3.9L Saturn Aura 2.4L 3.5L Fuel Pump
USD 72.49
For Dodge Ram 1500 2500 5.2L 5.9L 1996-1997 Fuel Pump w/Sending Unit E7093M
USD 64.99
For 2003 2004 Ford Expedition V8 5.4L Fuel Pump E2360M
USD 47.49
For 2004 2005 2006 2007 2008 Ford F-150 4.6L 5.4L Fuel Pump E2434M
USD 57.49
Newly Listed
For 2005-2006 Mazda Tribute Ford Escape Mercury Mariner 2.3L Fuel Pump
USD 62.99
For 6.2L 6.5L Humvee M998 Mechanical Fuel Pump 12342893 6472357 2910-01-168-7905
USD 28.00
For 2005-2007 Ford Escape Mercury Mariner L4 2.3L V6 3.0L Fuel Pump Electric
USD 73.11
For Ford Mustang 2.3L 1987-1993 Fuel Pump Moudle Assembly
USD 56.99
For 1985-1990 GMC S15 2.5L Chevrolet S10 Electric Fuel Pump Moudle Assembly
USD 59.99
Terms & Contact
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
Fuel Pump Fit For Ford E-150 Econoline 5.8L 5.0L 4.9L 1989 1990 1991
The Function of the fuel pump
is to supply fuel at a certain pressure to the engine fuel injection system.
However,the fuel pump have a limited life.If you notice any of the following
signs
with your car:
(1).Engine Sputtering at High Speeds
(2).Decreased Fuel Pressure
(3).Losing Power when the Vehicle is under Stress
(4).Inability to accelerate
(5).Decreasing Gas Mileage
(6).Engine Not Starting
This may indicate that you need to replace the fuel pump
Fuel Pump Replacement Guideline
:
Please Note
the following before replacing the fuel pump:
1.Ensure that you are in a well ventilated and level work area.
2.Use approved safety glasses or goggles when working on any motor vehicle.
3.The gasoline is sucked out of the tank and stored in a container dedicated to gasoline.
Picture(A)
Disconnect the ground (
negative
) cable of the battery and ensure that it does not accidentally spark while working.
Picture(
B
)
Locate and remove gas tank filler neck mounting bolts or remove the filler tube from the tank.
This will aid the fuel removal especially if you had problems accessing through the filler neck.
Picture(
C
)
Located the electrical connector for the fuel pump and fuel level sender which will be in the same wiring harness.
If access if difficult or you can't see them wait until the tank is lowered slightly to undo the connector.
Inspect electrical connector for burns or heated spots and replace if damaged.
A burned connector can cause a pump to fail intermittently.
Picture(
D
)
There will be fuel vapor lines as part of the EVAP system these will need to be removed or disconnected.
Picture(
E
)
Locate and release tank holder supports, there are two in most cases.
Remove the mounting bolts at this point the tank will become loose but may not come out.
Picture(
F
)
Lower the tank and release top mounted fuel lines or electrical connectors if any. Continue to remove the tank.
Picture(
G
)
Remove the tank, this will expose the fuel pump retainer ring.
Use an aerosol cleaner to remove dirt and debris from the area.
This will keep the inside of the fuel tank clean when performing the repair.
Picture(
H
)
Remove fuel pump mounting bolts or retainer ring to access the fuel pump module and remove the unit.
Use a hammer and punch to remove the ring counterclockwise.
Picture(
I
)
Remove the fuel pump which will be attached to the mounting plate or positioned down inside the tank held by plastic retainer clips.
Picture(
J
)
Remove the fuel pump from the tank.
Item Specifics
Brand :
Fuel_Kingparts
Manufacturer Part Number :
FK11620801G
Drive Type :
Electrical
Fuel Type :
Gasoline
Fitment Type :
Direct Replacement
Manufacturer Warranty :
1 Year
Mounting Hardware Included :
No
OE/OEM Part Number :
E2147S67075,P74598S,HP10187,SP2019H
Custom Bundle :
No
Gasket Included :
Yes
Modified Item :
No
Voltage :
12 V
Internal Or External :
Internal
Universal Fitment :
No
Quantity Per Application :
1
Wiring Harness Included :
No
Outlet Size :
3/8"
Terminal Quantity :
4
Inlet Count :
1
Outlet Count :
1
Pressure :
5-7 psi
Flow Rate :
30-40 gph
Fuel Level Sender Resistance :
10-70 ohm
Amperage :
10 A
Type :
Fuel Pump
Payment
Shipping
Returns
Contact Us
Warning
We only accept payment through PayPal.
All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
All of our brand new items come with a 60-Days money-back guarantee.
Any question, please contact us by email on working days.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
All rights reserved.